Hot Air Trough Type Paddle Dryer

• Certification: CE
• Standard: ASME
• Surface Treatment: Oxidation
• Manufacturing Process: Casting
• Material: Copper Alloy
• Transport Package: Standard Export Packing or as You Needs
• Model NO.: Dryer
• Specification: 1700*1600*1350mm
• Trademark: HF
• Origin: China
• HS Code: 84304900
• Production Capacity: 20sets/Month

Product Description

Product Description                                                          

Hot air trough type paddle dryer is a kind of stirring type hot air dryer for drying particles, short fibrous materials and powder materials. With double shaft mixing and spiral propulsion, it is special applicable for fast drying the materials with high humidity and high viscosity. It can lower the moisture content of high-humidity materials from 65% to 5-12% at one time. The drying time is short, usually 2-20 minutes.

Product Advantage

Materials contact with hot air directly in dynamic conditions. Low heat loss, full uniform heating and high drying efficiency.

Materials temperature in not high when drying, so it is applicable for heat sensitive materials.

Simple structure and small driving power, no complex operation mode and special manufacturing technology.

Applicable Materials

Sludge, gypsum, slurry, bentonite ore, vinasse, pomace, medicine residues, bean dregs, sugar residue, sauce residue, peat, rare earth, etc.

Working Principle

Materials are sent to agitating dryer by screw conveyor. The hot air enters into dryer from the tangential direction of the feeding end and contact with the pulverized materials for preliminary drying. The materials move backwards and continuously lifted and crushed by the stirring claw under the double action of stirring propulsion and air flow, and exchange heat and mass with hot air. In this part, materials pulverized small enough will dry first and flow away with the air flow. The larger particles with high water content will stay longer. At the back of the stirring dryer, materials enter into cyclone from upflow tube under the double action of lifting board and airflow. The hot air is added to accelerate the rotation of materials. The flow direction of airflow, wind speed and the arrangement of the secondary air outlets make the materials stay longer in the cyclone, so that the coarser powder is also fully dried. The dried materials are discharged from rotary discharging device in lower part. The exhaust gas from the cyclone is separated by the diffusing cyclone and then discharged by the fan.

Technical parameters                                                     

Specification	Heating volume(M3)	Power(KW)	Dimension(mm)
			L	W	H
φ600X2500	1.5	4.5	600	2500	1000
φ1000X3000	5.4	7.5	1000	3000	1800
φ1200X3500	8.4	11	1200	3500	2000
φ1600X5000	20	15	1600	5000	2500
φ2000X6000	35	22	2000	6000	3000
φ2500X6600	52.8	37	2500	6600	3200
φ3500X8000	112	75.2	3500	8000	4000

Working Site                                                                  

Company Introduction                                                  
Hanfa Group established in 1998 is a key enterprise in the industry of geological exploration and water well field, with the ability to research,manufacture and market. Now, the Group pursues high standard manufacturing and qualified products. It has more than 20 species such as water well drilling rig, core drilling rig, engineering drilling rig, DTH drilling rig, horizontaldirectional drilling rig, etc. These machines are mainly used in geological prospecting, exploration of railway and highway engineering, mining, SPT, water well, geothermal well etc. Some of them won the Scientific and Technical Advance Prize or the National Scientific Research Achievement Prize. All the products have passed the quality system certification of ISO9001:2000 and are national inspection-free products.



1. More than 20 years of experience 
The factory is located in Henan Province, China. We are very welcome to visit our factory. If
you need it, we will arrange a pick-up.
2.Top production team
The transportation and packaging will be packaged in international standards. If you have special packaging requirements, we will give you the most suitable solution.
3.Our Service
- New machine provides technical trair.
- Once anything goes wrong with the machine by normal using, our technical person must appear at the first time no matter where you are.
- When the machine should be maintained, you will receive the reminding from us.
- According to different geological conditions, we will recommend different construction plans for you
- Remind you which are wearing parts, so you can prepare enough.
- 24 hours respond to your quality problem.




FAQ                                                                                   
1, Are you trading company or manufacturer?
We are professional manufacturer, and our factory mainly produce water well drilling rig, core drilling rig, DTH drilling rig, piling rig, etc. Our products have been exported to more than 50 countries of Asia, South America, Africa, and get a good reputation in the world.

2, Are your products qualified?
Yes, our products all have gained ISO certificate,and we have specialized quality inspection department for checking every machine before leaving our factory.

3, How about your machine quality?
All of our machines hold the ISO, QC and TUV certificate, and each set of machine must pass a great number of strict testing in order to offer the best quality to our customers.

4, Do you have after service?
Yes, we have special service team which will offer you professional guidance. If you need, we can send our engineer to your worksite and provid the training for your staff.

5, What about the qaulity warranty?
We offer one-year quality warranty for machines' main body.

6, How long can you deliver the machine?
Generally, we can deliver the machine in 7 days.
Our Customers